產品中心
High-Pressure Centrifugal Fan

SCH-HF High Efficiency High Pressure Centrifugal Fan

Name: SCH-HF high efficiency high pressure centrifugal fan

Applications: Filtration, dust removal, purification and drying systems

Air flow range: :2000-130000m3/h

Total pressure range: 2000-25000Pa

Drive type: direct drive/coupling/ belt drive

Installation: duct, suspension, ground installation

Product features

Oriented from American advanced technology: High efficiency, low noise;

-Conduct American advanced blades, total pressure efficiency up to 88%, static pressure efficiency up to 85%;

-About 8dBA lower than the same type domestic fans;

-Backward inclined blades with non-overloading design;

 

-Precise wheel balance and final balance:

-All wheels are statically and dynamically balanced;

-Balance records for each wheel can be traced within 3 years;

-The final balance level for wheel diameter not in excess of 1600mm up to G2.5;

-The final balance level for wheel diameter above 1600mm up to G4.0;

-High balance level provides lower vibration and lower noise for extended service life of bearings;

-High balance level provides less internal stress for higher reliability of the whole unit;

 

-High quality components, high reliability:

-Construction strength above 1.4 times and 8.8G high strength bolts insure safe operation;

-Shafts are accurately turned, ground, polished, providing wide allowance factor; Shafts are generously sized for first critical speed of at least 1.43 times the maximum speed for accuracy;

-Import bearings are standard (including motor bearings) to improve the whole unit reliability;

-Bearing life (L10) in excess of 100000 hours at the maximum fan RPM;

-High-quality motor is standard, S1 continuous operation, 7X24 hours design, class B temperature rise;

-The ratio for transmitted power of drive parts such as coupling, belt reaches above 150%, long service life, high reliability;

-Long service life design;

-Service life for the whole unit up to 30 years (under standard conditions);

-Components should be electrostatic epoxy coated to provide good adhesion, fine anti-corrosion, anti-rust and UV-resistant characteristics.

-Design life for the whole unit in excess of 30 years under standard conditions, the first heavy repair time is above 26,000 hours (standard conditions refer to dry ambient under normal temperature and atmosphere pressure without corrosive gases)

 

-Precise processes:

-Blades cut by laser and formed from mould, special tools used for inspection;

-Specified revolving platform is used to make precise locations to decrease weld deformation efficiently;

-Inert-gas welding is applied to housing and wheel to improve welding quality and decrease deformation;

-Special cushion block under bearing decreases bearing vibration and improves bearing installation accuracy;

 

-Optimize the wheel diameter series according to actual usage statistics:

-Optimize the design wheel diameter series according to actual usage statistics;

-Select direct or coupling drive more easily, more economical and more reliable;

-A variety of types with the same performance are available for selection, complying with requirements more accurately;

-Provide non-standard designs according to clients’ special requirements.